This will allow you to update your Tactacam through the app in the future

Instructions:

(please reformat your SD card before you begin)

1. Charge your Tactacam battery fully.
2. Download the update file to your computer. below is the Update
   1. https://www.dropbox.com/s/d668an4cnbdbm1v/SPHOST.brn?dl=0
3. Put the downloaded SPHOST.brn file on your Tactacam SD card.
4. Power on the camera and Pause the camera.
5.  (Push and hold the power button) you will feel three vibrations, this will activate the update.
6. After the update your camera will power off. 
7. Check your camera's SD card. If you see the SPHOST.brn file on your Tactacam SD card remove it.
8. With the SPHOST.brn file removed you are ready to use your camera.

 
PC Help

1. Insert the SD card into your computer.
2. Click on the home button in the left hand corner, go to the file explorer, you will see your downloads folder. 
3. Locate the file that says SPHOST.brn and move it to your Tactacam SD on the left hand side. 
4. Once downloaded onto the Tactacam SD card eject the card by right clicking the Tactacam file and going down to where is says eject.
5. Take the SD card out of your computer and place it in the Tactacam.
6. Turn on your Tactacam and put in a pause mode.
7. Hold your Tactacam power/ record button down until you feel it vibrate 3 times. 
8. Let go of the button and wait until the lights on your Tactacam go out.
9. Your camera will power off after 30 to 45 sec.
10. Check your camera's SD card. If you see the SPHOST.brn file on your Tactacam SD card remove it.
11. With the SPHOST.brn file removed you are ready to use your camera.
12. You have successfully updated your Tactacam
    
    If the SPHOST.brn is not removed from the SD card the camera will re-update again. If this happens let the camera update. Then after the update simply remove the SPHOST.brn file from your SD card.